Please leave a message for us and we will reply in the first time

KRY -40℃~+100℃ 1&2
Heating Power:7.5kW~38kW
Support OEM customization!


  • krytu_1574054647.png

    Product Function Introduction:

    For power battery charging management, precision temperature control devices for permanent magnet synchronous motors, switched reluctance motors, asynchronous motors and their controllers can be controlled locally and remotely through the LCD control panel;

    It has the function of automatic fault protection and can output corresponding signals to ensure the safety of the equipment. The main components are all international brands, quality assurance, surface high-voltage electrostatic spray treatment, auxiliary equipment can be added according to specific needs.



    Temperature control systems are mainly used in two ways: they simulate external environmental conditions in the climate chamber or replace internal systems, such as the cooling circuit of an engine.

    Temperature simulation can ensure that the material remains (dimensionally) stable under extreme temperatures or rapid temperature changes, and the gasket remains leak-free over a wide dynamic range of pressure and temperature, and the pumping system can operate reliably regardless of temperature and viscosity.


    Temp Range-40℃~+100℃
    Temperature control precision±0.5℃
    Temperature feedbackPt100
    Temperature display0.01k
    Flow control/Group1~20 L/min1~20 L/min1~20 L/min1~40 L/min1~40 L/min
    Flow control accuracy/Group±0.2L
    Number of fluid output groups2 groups
    Pressure control/group0.2bar~2.5bar
    Flow descriptionWhen the temperature control is lower than -30℃, the flow rate is controlled within 80% of the maximum value.
    Flow pressure descriptionThe unit can control the flow individually or separately. Need to control different solutions at the same time (customized)
    Heating Power7.5kW10kW15kW25kW38kW



    CompressionEmerson Valley Wheel Compressor
    Expansion valve/solenoid valveDanfoss Thermal Expansion Valve / Emerson Solenoid Valve
    Oil distributorEmerson
    Dry filter, Pressure controlDanfoss
    EvaporatorDanfoss/KAORI plate heat exchanger
    Circulating pumpGerman brand magnetic drive pump
    Frequency converterDelta
    Flow,Pressure sensorElectromagnetic flowmeter, Johnson Controls pressure sensor
    Input, Display10 inch color touch screen Siemens S7-1200 PLC controller
    CommunicationModbus RTU protocol RS485 interface, optional CAN communication bus, Ethernet interface TCP/IP protocol
    Safety protectionWith self-diagnosis function; Refrigerator overload protection; High pressure switch, overload relay, thermal protection

    device, low liquid level protection, high temperature protection, sensor fault protection and other safety functions
    Closed circulation systemThe whole system is a fully closed system, there will be no oil mist at high temperature, low temperature does not

    absorb water in the air, the system in operation will not because of high temperature pressure rise, low temperature

    automatically add heat conduction medium.
    refrigerantR404A/R507C/R125/N40  All four refrigerants are available
    Connection sizeThere are two groups of inlet and outlet, G3/4
    Cooling water@20C2500L/H4000L/H8000L/H12000L/H18000L/H
    Condenser(W)Shenshi tube type heat exchanger
    Condenser(A)Optional air-cooled type, upper air outlet, the equipment size will be increased.
    Power 380V50HZ16.5kW24kW max36kW max56kW max81kW max
    Dimension cm70*100*17580*120*185100*150*185120*180*205145*205*225
    Optional220V 60HZ Three phase  400V 50HZ Three phase  440V 60HZ Three phase
    OptionalExtend to -40~+135℃
    OptionalThe size external circulation pipe line is DN15 or DN20, do not throttle, which will increase the circulation pump load,
    pipe need to be insulated, and adopt rubber and plastic insulation pipe which can afford high temp.


    工厂实力 (2).jpg

  • 20201125kry02.jpg