Product Function Introduction:
For power battery charging management, precision temperature control devices for permanent magnet synchronous motors, switched reluctance motors, asynchronous motors and their controllers can be controlled locally and remotely through the LCD control panel;
It has the function of automatic fault protection and can output corresponding signals to ensure the safety of the equipment. The main components are all international brands, quality assurance, surface high-voltage electrostatic spray treatment, auxiliary equipment can be added according to specific needs.
Temperature control systems are mainly used in two ways: they simulate external environmental conditions in the climate chamber or replace internal systems, such as the cooling circuit of an engine.
Temperature simulation can ensure that the material remains (dimensionally) stable under extreme temperatures or rapid temperature changes, and the gasket remains leak-free over a wide dynamic range of pressure and temperature, and the pumping system can operate reliably regardless of temperature and viscosity.
|Temperature control precision||±0.5℃|
|Flow rate output||1～15 L/min||1～25 L/min||1～30 L/min||1～40 L/min||1～40 L/min||5～50 L/min|
|Flow rate accuracy||±0.2 L/min|
|Pressure display||Adopt the Jeffron pressure sensor, the touch screen display the pressure, can carry on the pressure control adjustment.|
|Compression||Emerson Valley Wheel / Danfoss Scroll flexible Compressor|
|Expansion valve||Emerson / Danfoss thermal expansion valve|
|Device for drying & filtering||Emerson / Danvers|
|Evaporimeter||Danfoss/ High-force plate type heat exchanger|
|Input,Display||Siemens S7-1200 PLC controller of Siemens 7-inch color touch screen|
|Program editing||10 procedures can be developed and 42 steps can be prepared per procedure|
|Communication||CAN communication bus|
|Security guard||Self-diagnosis function; freezer overload protection; high pressure pressure switch, overload relay, thermal protection device, low liquid level protection, high temperature protection, sensor fault protection, etc.|
|Fully closed system||The whole system is a fully enclosed system. There is no oil mist at high temperature, and low temperature does not absorb moisture in the air. The system does not increase the pressure due to high temperature during operation, and the heat medium is automatically replenished at low temperature.|
|Water-cooled at 25 ℃||1500L/H||2500L/H||3000L/H||4000L/H||6000L/H||9000L/H|
|Water-cooled condenser||Paris / Shen casing heat exchanger|
|Air-cooled Condenser||Copper tube aluminum fin heat exchanger (form of upper air outlet)|
|Source 380V50HZ||10kw max||13kw max||17KW max||25KW max||38KW max||53KW max|
|Water cooling dimension cm||55*95*175||55*95*175||55*95*175||70*100*175||80*120*185||100*150*185|
|Air-cooled dimension cm||55*95*175||55*95*175||70*100*175||80*120*185||100*150*185|
|Weight (water cooling)||230kg||250kg||300kg||320kg||570kg||830kg|
|Apolegamy||220V 60HZ 400V 50HZ 440V 60HZ|
|Apolegamy||The temperature is extended to -40 ℃ ~ + 135 ℃|
|Apolegamy||Flow control to 1L/min (higher cost)|
|Apolegamy||Higher precision control of temperature, flow, pressure|
|Apolegamy||Automatic antifreeze system|
|Apolegamy||Automatic liquid recovery system|
If you need this device, you can communicate with online customer service or leave a message in the form below.