Time:2021-10-27

Please leave a message for us and we will reply in the first time

KRY 0℃~+100℃ 1&3
Heating Power:10kW~38kW
Dimension(cm):80*120*185~14*205*225
Weight:420KG~1700KG
Support OEM customization!

PRODUCTS

  • 4.jpg

    Multi-channel temperature flow control, one device can achieve multi-channel output, each channel can control different flows without interference with each other.


    Fully closed pipe design, high efficiency plate heat exchanger, used for lifting temperature and constant temperature control in new energy battery and motor test, especially suitable for heat and heat release process control during test.

    20201125kry02.jpg

    20201125kry03.jpg

    Equipment Instructions:


    The temperature range is usually -40°C to 100°C. (Expandable to 150℃)

    Equipped with a powerful circulating pump, while ensuring the delivery of high-viscosity liquids.

    Use frequency conversion adjustment or proportional control valve to control the flow output to achieve high-precision control of the total range of 5% to 100% adjustment.

    The inside of the part is cooled and heated by the glycol aqueous solution.

    The test component needs to go through a specific temperature curve and record the temperature change.


    新能源_02.jpg

    ModelKRY-A15W/3SKRY-A25W/3SKRY-A38W/3SKRY-A60W/3S
    KRY-A15/3SKRY-A25/3S
    Temp. Range0℃~+100℃
    Temp. control precision±0.5℃
    Temp. feedbackPt100
    Temp. display0.01k
    Flow control/Group2~25 L/min2~25 L/min2~25 L/min1~25 L/min
    Flow control accuracy/Group±0.2L±0.2L±0.2L±0.2L
    Number of fluid output groups3 Groups
    pressure control/Group0.2bar~2.5bar0.2bar~2.5bar0.2bar~2.5bar0.2bar~2.5bar
    flow pressure descriptionThe equipment can control flow and pressure separately. need to control at the same time using different solutions (to be customized)
    Heating power10kW15kW25kW38kW
    cooling capacity100℃15kW25kW38kW60kW

    20℃15kW25kW38kW60kW

    5℃11kW18kW27kW42kW
    compressionEmerson Valley Wheel Compressor
    expansionDanfoss  Thermal Expansion Valve/ Emerson Solenoid
    oil distributorEmerson
    Dry filter, PressureDanfoss
    EvaporatorDanfoss/KAORI plate heat exchanger
    Ciriulating pumpNangfang centrifugal pump can be selected with imported brand magnetic pump
    FrequencyDelta
    Flow, Pressure sensorGerman brand flowmeter, johnson Controls pressure
    input, DisplaySiemens 10-inch color touch screen Siemens s7-1200 PLC controller
    CommunicationModbus RTU protocol RS485 interface, optional CAN communication bus, Ethernet interface TCP/IP protocol
    Safety protectionWith self-diagnosis function; Refrigerator overload protection; High pressure switch, overload relay, thermal protection
    device, low liquid level protection, high temperature protection, sensor fault protection and other safety functions
    refrigerantR404A/R507C/R125/N40 All four refrigerants are available
    Connection sizeThere are three groups of inlet and outlet,G3/4
    Cooling water at 20C°3200L/H6000L/H9000L/H15000L/H
    Condenser(W)Shenshi tube type heat exchanger
    Power 380V50HZ22kW33kW45kW68kW
    Dimension cm80*120*185100*150*185120*180*205145*205*225
    Weight420kg750kg1000kg1700kg
    Optional220V 60HZ three phase    460V 60H three phase
    OptionalThe size external circulation pipe line is DN15 or DN20, do not throttle, which will increase the circulation pump load,
    pipe need to be insulated, and adopt rubber and plastic insulation pipe which can afford high temp.
    OptionalWhen the temperature is lower than the normal temperature, the refrigeration system adopts the refrigeration PID to adjust the cooling capacity, and does not adopt the heating countermeasures, so as to achieve the purpose of energy saving

    公司发展历程.jpg

    工厂实力 (2).jpg

    售后.png

    If you need this device, you can communicate with online customer service or leave a message in the form below.